Home

When you think of plumbing, do you just see it as a hidden and mysterious network of pipes and pumps that makes your toilets and sinks work? If so, then you are very unlikely to have a go at mauntaining or repairing the system. Plumbing is not actually that complicated, and there are many things that you can do yourself to maintain and repair your system. Read on to find out how.

Service Plumbing And Heating

On very cold winter nights, allow your faucets to trickle slightly, especially if your pipes are located in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. You can catch the water and use it for other household needs to prevent wasting it.

Check how well your toilets are flushing. If the handle needs to be played with in order to keep the water from running constantly, or if it needs to be held down several times in order to flush, you may need to switch out some of the parts in your tank. This is not expensive, and it could help reduce your monthly water bill. It could also mean that you avoid the embarrassment of the flushing system breaking when you have visitors!

Toilet Plumbing Repair

Find a better way to discard of cooking oil instead of pouring it down the drain where it can easily clog your pipes. Keep a coffee can or other metal container handy to pour grease into after cooking. Place the can in the freezer to harden the grease and when it’s full, discard it with the trash.

Use strainers in all drains to catch hair and other objects. This will prevent all the material from going down the drain and causing a clog, which can cause a bigger problem down the line. Clean out the strainers daily so that you don’t start getting backup of water in your sink or tub.

Plumber Service Call

Make sure that you disconnect all hoses outside your house when the fall season hits. This is important to reduce the chance of freezing, which can cause damage to the connecting pipes. Disconnect all of your water hoses and store them safely to put your family in the best position for the fall.

If your drain in any device is taking longer to drain water, then you may need to have your pipes professionally cleaned depending on the severity of the circumstances. Before you do this, there are several different products you can try. However, some of them are professional strength and all products should be used with caution.

Make sure you get a good recommendation or check the references before you hire a plumber. With good recommendations, it will assure that you are hiring an experienced plumber. If the experienced plumber is professional, he will have a fully stocked truck and be able to complete most small jobs in one visit.

Plumbing Garbage Disposal

If you live in an area that sees routine freezing temperatures, make sure you do something to keep your pipes from becoming frozen as well. There are a wide variety of ways you can keep your pipes from freezing, which will help you avoid damage to your home and costly repairs.

Avoid pouring grease or oil down your kitchen sink drain. Grease and oil can build up in your pipes and cause a backup. Instead, wait for the grease or oil to cool and solidify and either throw it away or see if there’s a place to recycle it near your home.

If the hot water heater in your house is over ten years old, you should look at replacing it. Hot water heaters are very susceptible to corrosion on the bottom. This can lead to leaking and flooding whatever room it is in. Then not only will you have to replace it, but you’ll have to fix any damage caused by the leak.

When you’re going away on a vacation, you should consider shutting off the water supply to your home. This can help stop many problems before they start. If you don’t do this, you should have someone stop by your house regularly to check that nothing has gone wrong and that your home isn’t flooded.

Plumbing Repair Estimates

Realize that branch lines can get blocked and cause sewage backups that affect main lines. If you can’t clear the blockage yourself, contact a professional plumber, who can insert a snake into the line to break up the blockage.

Do not pour grease and oil down your drains. Cooking grease will build up in your pipes and could cause back-ups. Keep grease and oil in a container in your fridge and throw it in the trash when it is full. Avoid clogging your pipes with any products containing oil or grease.

If you are seeing areas in your ceiling or walls that appear to have water damage or are sagging, make sure you turn off the power before inspecting. Electricity and water do not mix. The last thing you need is to go into the attic and get shocked by a pool of water.

To avoid plumbing disasters in your kitchen, never place hard-to-grind, stringy, fibrous waste, such as poultry skins, banana peels, carrots, celery, or cantaloupe pulp, into the garbage disposer. The disposer can’t sufficiently grind these food products and they will clog your sink drain. You should also run cold water down the drain for about 15 seconds before and after using the garbage disposer to flush the waste down the main drain.

Fitting Of Valve

When it comes to plumbing a great choice is to invest in brass fittings. Sure, they may be more expensive upfront, however their longevity is amazing compared to the alternatives, so you end up saving money. As an added bonus, the brass fittings look so much better than the other alternatives.

It should not be necessary to call out a professional for every repair job. If you take your time and apply sensible advice, such as what you read here, you can successfully repair many of the common faults that develop. It may take a longer the first few times, but after a few successes you will pick up speed.

Sound Advice For Plumbing Maintenance And Repair

Fitting Of Valve Taking the time to learn to do plumbing on your own truly shows when you do it. Doing so illustrates that you are concerned with appropriate maintenance, and so you are willing to maintain order with your own time, sweat and hands. This is something that should be admired. With plumbing you can be an expert and still learn new tricks; there is always something to be gained or improved on. Below you will see some helpful tips. To avoid clogs, pay attention to what you flush. Sanitary napkins, thick toilet paper and baby wipes should never be flushed. These items can expand and cause a clog, or get caught on a pipe. Instead, dispose of them in a sanitary way that does not involve flushing them down the toilet. It is important to know how to properly anchor your pipes when it comes to plumbing. This is extremely important to know because not having your pipes well anchored could result in loud noises, leaks, or pressure problems. Call a professional if you are unsure how to take care of it yourself. Check how well your toilets are flushing. If the handle needs to be played with in order to keep the water from running constantly, or if it needs to be held down several times in order to flush, you may need to switch out some of the parts in your tank. This is not expensive, and it could help reduce your monthly water bill. It could also mean that you avoid the embarrassment of the flushing system breaking when you have visitors! Frozen and bursting pipes from harsh winter weather is a problem that no-one wants, so plan now to winterize your exterior faucets and pipes against freezing conditions. A simple way to accomplish this is to find the exterior water shut-off valve located inside your home (often located in the basement). Turn off the water valve to stop water flow, and then open up the outside faucets to drain out any water that has collected. Be sure to turn off the outside water faucets tightly after the water has drained out. Take in any hoses you may have outside so they don't crack from the cold weather. You can check your toilet for leaks by adding a few drops of food coloring, Kool Aid or some coffee grounds to the water in the toilet's tank (not the water in the bowl). Check the water in the bowl after a half hour or so. If any of the coloring agent is visible in the water in the bowl, the tank is leaking, and you will have to have it repaired. If you are using PEX tubing for the supply lines in your home, make sure you get the right tools for the job. PEX tubing requires a completely different tool type than regular lines. PEX has a lot of benefits though, so don't let the different requirements throw you off. Do not, under any circumstances, put lemons down your disposal. Although the lemon smell will give your disposal a great smell, its acid can corrode the metal parts in it. Instead, use products that are made specifically for this use. You can purchase these products at most hardware stores or wherever cleaning products are sold. Everyone in your home should know where the main water shut off valve is. By knowing where to find this valve, you'll be able to shut off the water in the event a pipe bursts, a bathtub or toilet overflows or any other emergency that requires you to turn off the water. If there's grout stuck inside your line, it's most likely will be a losing cause if you try to fix it all by yourself. You can attempt to break up some of the grout which works to help the line go a bit smoother. This will work better if the pipes you have are plastic instead of metal. This usually requires professional people to come in to help you get rid of this problem. Frozen pipes can lead to many problems, most of them expensive to fix. So you want to avoid that at all costs. To avoid frozen pipes, make sure the temperature in your home never drops below 55 degrees. Look for any air leaks around your pipes and make sure they're sealed up. During the warm seasons, you will see that there will be many bird nests forming in and around your plumbing vent pipes. It is essential to clear these out, as they can have a devastating effect on the quality of your plumbing and the flow of water in your home. In the winter months, if you live somewhere where temperatures fall below freezing, leave your faucets on a little bit to let a thin stream of water through. This will help prevent the pipes from freezing, which could be a major problem for you and all the pipes in your home. During the winter months, your water heater works the hardest. To keep it in optimum condition, flush it out before winter arrives. Flushing the system helps remove the sediment buildup, which causes internal corrosion of your water heater, shortens its lifespan, and reduces heating efficiency. Connect a hose to the faucet near the bottom of the tank and drain several gallons by directing the water into a nearby drain. The key to finding a great plumber for new construction is to look at their prior jobs. Good plumbers take pride in the work they do, so they will have photos and references from previous jobs. If the plumber you are considering hiring does not have references or photos of previous jobs, then stay away and find another. With this advice, you now have a much better idea of how to take care of your basic home plumbing. That must feel great! The tips that you have read were designed to help improve your plumbing skills. Remember to always educate yourself, so you can become even better and more knowledgeable. You might have found a great idea or a new "regular" when it comes to your plumbing jobs.

Fantastic Plumbing Tips That Can Really Help

Plumbing Services List Your home's and Industry's plumbing systemhas variety of valves found at various points along the water pipes that allow you to turnoff the water during emergencies, or when you need to makes repairs or upgrades. Shutting off the water is often the firststep of many plumbing projects. Locating and turning off the appropriate watershut off valve is therefore, very important. In this video we will go to learn DifferentType of water Valves. If you like our video, so please subscribeOur Channel Learning Engineering. Ball Valve. A ball valve is normally a rather large metalvalve usually featuring a lever handle. It is designed for quick turn-off, since thevalve opens and closes full with a short 1/4 turn of the lever handle. This is the type of valve often seen at themain water shut-off for the home & industry. Gate Valve. A gate valve describes the mechanism by whichthe valve is opened and closed. To turn a gate valve on or off, a circularhandle is turned to rise or lowers a metal gate inside the valve body. When the valve is off the gate blocks theflow of water. Globe Valve. From the outside, a globe valve resemblesa ball valve, with a slightly bulbous metal body. However, unlike a ball valve, a globe valveis designed to allow variable adjustment of water flow. Inside the valve, there is a baffle with awater flow port running through it The handle operates a plunger with some sort of washeror seal on the bottom; as the handle closes the valve, the plunger moves down againstthe water-flow port and partially closes it off. Angled Fixture Shut-Off Valves. Individual fixtures all should have some formin individual shut-off valves that control water to only those fixtures. This allows water to be shut off for smallrepairs or replacements to the fixture itself without interrupting water flow to other areas. These fixture shut-off valves can take manyappearances, but one that is very common is small silver-colored valve with an oval handlewith ribbed edges for gripping. Straight Fixture Shut-off Valves. A close relative of the angled fixture shut-offis a straight shut-off which operates exactly the same way, but is intended for use wherethe water flow can run straight to the fixture. It's very often used where a water pipe comesup out of the floor rather than out from the wall. Stop-and-Waste Valve. A stop and waste valve is a key irrigationfitting to help keep sprinkler lines free from freezing in the winter. The stop and waste valve is turned on andoff with a meter key and when it is in the off position it will automatically drain anywater in the line. Check Valves. The water moving through your plumbing shouldonly travel one way: from the supply lines and out through a fixture, or from a drainto the sewer main. To assure a one-way flow in the event of a"cross-connection", a check valve is necessary. Butterfly Valves. Butterfly valves are not particularly beautiful(it's pretty disappointing, we know). In fact, they look a lot like any other valve. The butterfly moniker refers instead to themechanism inside, essentially a disc that rotates by handle turns; this of course meansthat flow is reduced through the valve. Diaphragm Valve. A diaphragm valve is similar to a gate valvein that there is a wheel or knob that moves an element in the valve fitting, which limitsthe flow of water. In a diaphragm valve, the element is a diaphragmthat settles down over a saddle, thus stopping water flow. Pressure Balanced Valve. Pressure balanced valves are used to maintaina constant temperature of water in domestic showers or bathtubs. A diaphragm within the valve allows the operatorto set mixing of hot and cold water; however in the event of a pressure drop of cold water(for instance, if a toilet nearby is flushed), the diaphragm will shift to limit an excessiveflow of hot water. Many jurisdictions require pressure balancedvalves in domestic bathrooms and showers to prevent accidental scalding. Zone Valve. Zone valves are used in hydronic heating andcooling systems to control the flow of water or steam. For instance, they may be provided in differentrooms, different floors, or different dwelling units so that each space can have local controlover the heating or cooling. In most applications, zone valves are electricallycontrolled and are connected to a thermostat so that automatic control is achieved. Locking Valve. Almost any type of valve can be locked toavoid accidental or intentional opening or closing. However, valves with lever-type handles allowfor more secure locking control. Locking valves provide aligning holes thata lock can be passed through to stop rotation of the handle. There are also locks designed to be attachedto non-locking valves to prevent adjustment. Solenoid Valve. Solenoid valves are electrically controlledvalves that can offer precise on/off control via an automation system. Solenoid valves are used in buildings wherean automation system controls the plumbing or HVAC system. Another common use is in irrigation systemswhere a computer controls the watering times or the amount of water to be applied. Thanks for watching this video. You have any question about this video, soplease write the comment box. More update please subscribes our channelLearning Engineering.